Why the DS801-C docking Station didn't recognize our ethernet?

Why the DS801-C docking Station didn't recognize our ethernet?

Reading Why the DS801-C docking Station didn't recognize our ethernet? 1 minute Next Why the DS801-C docking Station didn't recognize our displayer?

Reason:  You need to reset the TCP/IP Address.

macOS:

System preferences→Network→ Select ”USB 10/100/1000 LAN...”

→ Configure: Manually--Fill in IP address, Subnet Mask, and Router(Default Gateway on windows)

→Click ”Advanced...”→TCP/IP, Configure IPv4:Manually

→DNS, Fill in a Preferred DNS server address and alternate DNS server address→Click ”OK”

 

Windows:

Start→Settings→Network and Internet→Ethernet→Change adapter options

→Double-click the icon of the network you want to connect to→Click ”properties”

→Double-click "Internet Protocol Version 4 TCP/IPv4"→Select ”Use the IP address below”

→Fill in the IP address, subnet mask, and Default gateway (Router on MacOS)

→Select ”Use the DNS server address below”, Fill in a Preferred DNS server address and alternate DNS server address

→Click ”Confirm”

 

👈Back To Docking Stations (DS801-C) Help Center

👈Back To  Minisopuru Help Center (FAQ)

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.